Multigas Filter
3M P100 Cartridges For Ammonia Methylamine P100 series for hazardous gases. What industry can use this cartridge? P100 3M cartridges for ammonia can be used in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. These replacement filters helps provide respiratory protection from ammonia, methylamine and certain particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces.
Face Cover
This is a combined ammonia/methylamine cartridge with P100 particulate filter. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use for sandblasting or in environments that are immediately dangerous to life or health (IDLH). Box of 2
Applications:
- Cartridge for 7500 respirators
- Agriculture
- Chemical Manufacturing
- Laboratories
- Food Industry
- Demolition
- Facility Maintenance
- Sanding
- Pesticide / Herbicide Spraying
FAQ – 3M P100 Ammonia/Methylamine Multigas Filter Cartridges: Trusted Protection Across Industries
Q1: What type of protection do the 3M P100 Ammonia/Methylamine cartridges provide?
The 3M P100 Multigas Filter Cartridges are designed to protect against ammonia, methylamine, and certain airborne particulates. These cartridges combine a gas/vapor cartridge with a P100 particulate filter, delivering 99.97% filtration efficiency for both oil and non-oil based particulates. They are NIOSH approved (42 CFR Part 84) and provide reliable respiratory protection in diverse industrial environments.
Q2: Which respirators are compatible with the 3M P100 cartridges?
These cartridges are compatible with 3M Half and Full Facepiece Respirators, including the 3M 6000, 6500, 7000, and FF-400 Series. They attach securely with a bayonet-style connection, allowing quick and easy installation while maintaining a tight, reliable seal.
Q3: In what industries can the 3M Ammonia/Methylamine P100 cartridges be used?
The 3M P100 cartridges are widely used in agriculture, chemical manufacturing, laboratories, and the food industry, as well as in facility maintenance, demolition, sanding, and pesticide or herbicide spraying. They are ideal for workplaces where ammonia, methylamine vapors, and particulate contaminants are present.
Q4: What are the exposure limits for these cartridges?
When used with half-facepiece respirators, the 3M P100 cartridges provide protection up to 10 times the Permissible Exposure Limit (PEL). When used with full-facepiece respirators, they can protect up to 50 times the PEL—provided the respirator has been quantitatively fit tested and is properly sealed during use.
Q5: Can these cartridges be used for sandblasting or IDLH environments?
No. These cartridges are not approved for sandblasting or use in IDLH (Immediately Dangerous to Life or Health) environments. For those conditions, a supplied-air respirator or self-contained breathing apparatus (SCBA) is required.
Q6: Are the 3M P100 cartridges easy to install and maintain?
Yes. The bayonet-style mount allows for simple twist-on installation and removal, ensuring fast replacement and minimal downtime. Users should always perform a user seal check before entering contaminated areas and replace cartridges when breathing becomes difficult or when odor breakthrough occurs.
Q7: How are the 3M P100 Ammonia/Methylamine cartridges packaged?
Each pack contains two cartridges, sealed for protection against contamination before use. Store cartridges in their original packaging in a clean, dry location away from direct sunlight and chemicals to maintain performance and shelf life.
